Module effect Methods

AdaptiveBlurImage() adaptively blurs the image by blurring less intensely near image edges and more intensely far from edges. We blur the image with a Gaussian operator of the given radius and standard deviation (sigma). For reasonable results, radius should be larger than sigma. Use a radius of 0 and AdaptiveBlurImage() selects a suitable radius for you.

The format of the AdaptiveBlurImage method is:

  Image *AdaptiveBlurImage(const Image *image,const double radius,
    const double sigma,ExceptionInfo *exception)
  Image *AdaptiveBlurImageChannel(const Image *image,
    const ChannelType channel,double radius,const double sigma,
    ExceptionInfo *exception)

A description of each parameter follows:

image

the image.

channel

the channel type.

radius

the radius of the Gaussian, in pixels, not counting the center pixel.

sigma

the standard deviation of the Laplacian, in pixels.

exception

return any errors or warnings in this structure.

AdaptiveSharpenImage() adaptively sharpens the image by sharpening more intensely near image edges and less intensely far from edges. We sharpen the image with a Gaussian operator of the given radius and standard deviation (sigma). For reasonable results, radius should be larger than sigma. Use a radius of 0 and AdaptiveSharpenImage() selects a suitable radius for you.

The format of the AdaptiveSharpenImage method is:

  Image *AdaptiveSharpenImage(const Image *image,const double radius,
    const double sigma,ExceptionInfo *exception)
  Image *AdaptiveSharpenImageChannel(const Image *image,
    const ChannelType channel,double radius,const double sigma,
    ExceptionInfo *exception)

A description of each parameter follows:

image

the image.

channel

the channel type.

radius

the radius of the Gaussian, in pixels, not counting the center pixel.

sigma

the standard deviation of the Laplacian, in pixels.

exception

return any errors or warnings in this structure.

BlurImage() blurs an image. We convolve the image with a Gaussian operator of the given radius and standard deviation (sigma). For reasonable results, the radius should be larger than sigma. Use a radius of 0 and BlurImage() selects a suitable radius for you.

BlurImage() differs from GaussianBlurImage() in that it uses a separable kernel which is faster but mathematically equivalent to the non-separable kernel.

The format of the BlurImage method is:

  Image *BlurImage(const Image *image,const double radius,
    const double sigma,ExceptionInfo *exception)
  Image *BlurImageChannel(const Image *image,const ChannelType channel,
    const double radius,const double sigma,ExceptionInfo *exception)

A description of each parameter follows:

image

the image.

channel

the channel type.

radius

the radius of the Gaussian, in pixels, not counting the center pixel.

sigma

the standard deviation of the Gaussian, in pixels.

exception

return any errors or warnings in this structure.

ConvolveImage() applies a custom convolution kernel to the image.

The format of the ConvolveImage method is:

  Image *ConvolveImage(const Image *image,const size_t order,
    const double *kernel,ExceptionInfo *exception)
  Image *ConvolveImageChannel(const Image *image,const ChannelType channel,
    const size_t order,const double *kernel,ExceptionInfo *exception)

A description of each parameter follows:

image

the image.

channel

the channel type.

order

the number of columns and rows in the filter kernel.

kernel

An array of double representing the convolution kernel.

exception

return any errors or warnings in this structure.

DespeckleImage() reduces the speckle noise in an image while perserving the edges of the original image.

The format of the DespeckleImage method is:

  Image *DespeckleImage(const Image *image,ExceptionInfo *exception)

A description of each parameter follows:

image

the image.

exception

return any errors or warnings in this structure.

EdgeImage() finds edges in an image. Radius defines the radius of the convolution filter. Use a radius of 0 and EdgeImage() selects a suitable radius for you.

The format of the EdgeImage method is:

  Image *EdgeImage(const Image *image,const double radius,
    ExceptionInfo *exception)

A description of each parameter follows:

image

the image.

radius

the radius of the pixel neighborhood.

exception

return any errors or warnings in this structure.

EmbossImage() returns a grayscale image with a three-dimensional effect. We convolve the image with a Gaussian operator of the given radius and standard deviation (sigma). For reasonable results, radius should be larger than sigma. Use a radius of 0 and Emboss() selects a suitable radius for you.

The format of the EmbossImage method is:

  Image *EmbossImage(const Image *image,const double radius,
    const double sigma,ExceptionInfo *exception)

A description of each parameter follows:

image

the image.

radius

the radius of the pixel neighborhood.

sigma

the standard deviation of the Gaussian, in pixels.

exception

return any errors or warnings in this structure.

FilterImage() applies a custom convolution kernel to the image.

The format of the FilterImage method is:

  Image *FilterImage(const Image *image,const KernelInfo *kernel,
    ExceptionInfo *exception)
  Image *FilterImageChannel(const Image *image,const ChannelType channel,
    const KernelInfo *kernel,ExceptionInfo *exception)

A description of each parameter follows:

image

the image.

channel

the channel type.

kernel

the filtering kernel.

exception

return any errors or warnings in this structure.

GaussianBlurImage() blurs an image. We convolve the image with a Gaussian operator of the given radius and standard deviation (sigma). For reasonable results, the radius should be larger than sigma. Use a radius of 0 and GaussianBlurImage() selects a suitable radius for you

The format of the GaussianBlurImage method is:

  Image *GaussianBlurImage(const Image *image,onst double radius,
    const double sigma,ExceptionInfo *exception)
  Image *GaussianBlurImageChannel(const Image *image,
    const ChannelType channel,const double radius,const double sigma,
    ExceptionInfo *exception)

A description of each parameter follows:

image

the image.

channel

the channel type.

radius

the radius of the Gaussian, in pixels, not counting the center pixel.

sigma

the standard deviation of the Gaussian, in pixels.

exception

return any errors or warnings in this structure.

MotionBlurImage() simulates motion blur. We convolve the image with a Gaussian operator of the given radius and standard deviation (sigma). For reasonable results, radius should be larger than sigma. Use a radius of 0 and MotionBlurImage() selects a suitable radius for you. Angle gives the angle of the blurring motion.

Andrew Protano contributed this effect.

The format of the MotionBlurImage method is:

      Image *MotionBlurImage(const Image *image,const double radius,
  const double sigma,const double angle,ExceptionInfo *exception)
      Image *MotionBlurImageChannel(const Image *image,const ChannelType channel,
  const double radius,const double sigma,const double angle,
  ExceptionInfo *exception)

A description of each parameter follows:

image

the image.

channel

the channel type.

radius

the radius of the Gaussian, in pixels, not counting the center

radius

the radius of the Gaussian, in pixels, not counting the center pixel.

sigma

the standard deviation of the Gaussian, in pixels.

angle

Apply the effect along this angle.

exception

return any errors or warnings in this structure.

PreviewImage() tiles 9 thumbnails of the specified image with an image processing operation applied with varying parameters. This may be helpful pin-pointing an appropriate parameter for a particular image processing operation.

The format of the PreviewImages method is:

  Image *PreviewImages(const Image *image,const PreviewType preview,
    ExceptionInfo *exception)

A description of each parameter follows:

image

the image.

preview

the image processing operation.

exception

return any errors or warnings in this structure.

RadialBlurImage() applies a radial blur to the image.

Andrew Protano contributed this effect.

The format of the RadialBlurImage method is:

      Image *RadialBlurImage(const Image *image,const double angle,
  ExceptionInfo *exception)
      Image *RadialBlurImageChannel(const Image *image,const ChannelType channel,
  const double angle,ExceptionInfo *exception)

A description of each parameter follows:

image

the image.

channel

the channel type.

angle

the angle of the radial blur.

exception

return any errors or warnings in this structure.

SelectiveBlurImage() selectively blur pixels within a contrast threshold. It is similar to the unsharpen mask that sharpens everything with contrast above a certain threshold.

The format of the SelectiveBlurImage method is:

  Image *SelectiveBlurImage(const Image *image,const double radius,
    const double sigma,const double threshold,ExceptionInfo *exception)
  Image *SelectiveBlurImageChannel(const Image *image,
    const ChannelType channel,const double radius,const double sigma,
    const double threshold,ExceptionInfo *exception)

A description of each parameter follows:

image

the image.

channel

the channel type.

radius

the radius of the Gaussian, in pixels, not counting the center pixel.

sigma

the standard deviation of the Gaussian, in pixels.

threshold

only pixels within this contrast threshold are included in the blur operation.

exception

return any errors or warnings in this structure.

ShadeImage() shines a distant light on an image to create a three-dimensional effect. You control the positioning of the light with azimuth and elevation; azimuth is measured in degrees off the x axis and elevation is measured in pixels above the Z axis.

The format of the ShadeImage method is:

  Image *ShadeImage(const Image *image,const MagickBooleanType gray,
    const double azimuth,const double elevation,ExceptionInfo *exception)

A description of each parameter follows:

image

the image.

gray

A value other than zero shades the intensity of each pixel.

azimuth, elevation

Define the light source direction.

exception

return any errors or warnings in this structure.

SharpenImage() sharpens the image. We convolve the image with a Gaussian operator of the given radius and standard deviation (sigma). For reasonable results, radius should be larger than sigma. Use a radius of 0 and SharpenImage() selects a suitable radius for you.

Using a separable kernel would be faster, but the negative weights cancel out on the corners of the kernel producing often undesirable ringing in the filtered result; this can be avoided by using a 2D gaussian shaped image sharpening kernel instead.

The format of the SharpenImage method is:

      Image *SharpenImage(const Image *image,const double radius,
  const double sigma,ExceptionInfo *exception)
      Image *SharpenImageChannel(const Image *image,const ChannelType channel,
  const double radius,const double sigma,ExceptionInfo *exception)

A description of each parameter follows:

image

the image.

channel

the channel type.

radius

the radius of the Gaussian, in pixels, not counting the center pixel.

sigma

the standard deviation of the Laplacian, in pixels.

exception

return any errors or warnings in this structure.

SpreadImage() is a special effects method that randomly displaces each pixel in a block defined by the radius parameter.

The format of the SpreadImage method is:

  Image *SpreadImage(const Image *image,const double radius,
    ExceptionInfo *exception)

A description of each parameter follows:

image

the image.

radius

Choose a random pixel in a neighborhood of this extent.

exception

return any errors or warnings in this structure.

StatisticImage() makes each pixel the min / max / median / mode / etc. of the neighborhood of the specified width and height.

The format of the StatisticImage method is:

  Image *StatisticImage(const Image *image,const StatisticType type,
    const size_t width,const size_t height,ExceptionInfo *exception)
  Image *StatisticImageChannel(const Image *image,
    const ChannelType channel,const StatisticType type,
    const size_t width,const size_t height,ExceptionInfo *exception)

A description of each parameter follows:

image

the image.

channel

the image channel.

type

the statistic type (median, mode, etc.).

width

the width of the pixel neighborhood.

height

the height of the pixel neighborhood.

exception

return any errors or warnings in this structure.

UnsharpMaskImage() sharpens one or more image channels. We convolve the image with a Gaussian operator of the given radius and standard deviation (sigma). For reasonable results, radius should be larger than sigma. Use a radius of 0 and UnsharpMaskImage() selects a suitable radius for you.

The format of the UnsharpMaskImage method is:

      Image *UnsharpMaskImage(const Image *image,const double radius,
  const double sigma,const double amount,const double threshold,
  ExceptionInfo *exception)
      Image *UnsharpMaskImageChannel(const Image *image,
  const ChannelType channel,const double radius,const double sigma,
  const double amount,const double threshold,ExceptionInfo *exception)

A description of each parameter follows:

image

the image.

channel

the channel type.

radius

the radius of the Gaussian, in pixels, not counting the center pixel.

sigma

the standard deviation of the Gaussian, in pixels.

amount

the percentage of the difference between the original and the blur image that is added back into the original.

threshold

the threshold in pixels needed to apply the diffence amount.

exception

return any errors or warnings in this structure.