PerlMagick API

PerlMagick is an objected-oriented Perl interface to ImageMagick. Use the module to read, manipulate, or write an image or image sequence from within a Perl script. This makes it very suitable for Web CGI scripts. You must have ImageMagick 6.5.5 or above and Perl version 5.005_02 or greater installed on your system for PerlMagick to build properly.

There are a number of useful scripts available to show you the value of PerlMagick. You can do Web based image manipulation and conversion with MagickStudio, or use L-systems to create images of plants using mathematical constructs, and finally navigate through collections of thumbnail images and select the image to view with the WebMagick Image Navigator.

You can try PerlMagick from your Web browser at the ImageMagick Studio. Or, you can see examples of select PerlMagick functions.

UNIX

The following instructions for Unix apply only to the unbundled PerlMagick as obtained from CPAN. PerlMagick is included as a subdirectory (PerlMagick) of the ImageMagick source distribution, and may be configured and built using the instructions provided in the ImageMagick distribution's README.txt file. It is usually most convenient to install PerlMagick as part of the ImageMagick distribution.

ImageMagick must already be installed on your system. Next, get the PerlMagick distribution corresponding to the installed ImageMagick distribution (e.g., PerlMagick 6.70 for ImageMagick 6.7.0) and unpack it as shown below:

$magick> tar xvfz PerlMagick-6.70.tar.gz $magick> cd PerlMagick

Next, edit Makefile.PL and change LIBS and INC to include the appropriate path information to the required MagickCore library. You may need paths to JPEG, PNG, TIFF, etc. delegates if they were included with your installed version of ImageMagick. Build and install it like this:

$magick> perl Makefile.PL $magick> make $magick> make install

For Unix, you typically need to be root to install the software. There are ways around this. Consult the Perl manual pages for more information.

Windows XP / Windows 2000

ImageMagick must already be installed on your system. Also, the ImageMagick source distribution for Windows 2000 is required. You must also have the nmake from the Visual C++ or J++ development environment. Copy \bin\IMagick.dll and \bin\X11.dll to a directory in your dynamic load path such as c:\perl\site\5.00502.

Next, type

$magick> cd PerlMagick $magick> perl Makefile.nt $magick> nmake $magick> nmake install

See the PerlMagick Windows HowTo page for further installation instructions.

Running the Regression Tests

To verify a correct installation, type

$magick> make test

Use nmake test under Windows. There are a few demonstration scripts available to exercise many of the functions PerlMagick can perform. Type

$magick> cd demo $magick> make

You are now ready to utilize the PerlMagick methods from within your Perl scripts.

Any script that wants to use PerlMagick methods must first define the methods within its namespace and instantiate an image object. Do this with:

  use Image::Magick;

  $image=Image::Magick->new;

The new() method takes the same parameters as SetAttribute . For example,

  $image=Image::Magick->new(size=>'384x256');

Next you will want to read an image or image sequence, manipulate it, and then display or write it. The input and output methods for PerlMagick are defined in Read or Write an Image. See Set an Image Attribute for methods that affect the way an image is read or written. Refer to Manipulate an Image for a list of methods to transform an image. Get an Image Attribute describes how to retrieve an attribute for an image. Refer to Create an Image Montage for details about tiling your images as thumbnails on a background. Finally, some methods do not neatly fit into any of the categories just mentioned. Review Miscellaneous Methods for a list of these methods.

Once you are finished with a PerlMagick object you should consider destroying it. Each image in an image sequence is stored in virtual memory. This can potentially add up to mebibytes of memory. Upon destroying a PerlMagick object, the memory is returned for use by other Perl methods. The recommended way to destroy an object is with undef:

  undef $image;

To delete all the images but retain the Image::Magick object use

  @$image = ();

and finally, to delete a single image from a multi-image sequence, use

  undef $image->[$x];

The next section illustrates how to use various PerlMagick methods to manipulate an image sequence.

Some of the PerlMagick methods require external programs such as Ghostscript. This may require an explicit path in your PATH environment variable to work properly. For example (in Unix),

$magick> $ENV{PATH}='/../bin:/usr/bin:/usr/local/bin';

Here is an example script to get you started:

  #!/usr/local/bin/perl
  use Image::Magick;

  my($image, $x);

  $image = Image::Magick->new;
  $x = $image->Read('girl.png', 'logo.png', 'rose.png');
  warn "$x" if "$x";

  $x = $image->Crop(geometry=>'100x100+100+100');
  warn "$x" if "$x";

  $x = $image->Write('x.png');
  warn "$x" if "$x";

The script reads three images, crops them, and writes a single image as a GIF animation sequence. In many cases you may want to access individual images of a sequence. The next example illustrates how this done:

  #!/usr/local/bin/perl
  use Image::Magick;

  my($image, $p, $q);

  $image = new Image::Magick;
  $image->Read('x1.png');
  $image->Read('j*.jpg');
  $image->Read('k.miff[1, 5, 3]');
  $image->Contrast();
  for ($x = 0; $image->[$x]; $x++)
  {
    $image->[$x]->Frame('100x200') if $image->[$x]->Get('magick') eq 'GIF';
    undef $image->[$x] if $image->[$x]->Get('columns') < 100;
  }
  $p = $image->[1];
  $p->Draw(stroke=>'red', primitive=>'rectangle', points=>20,20 100,100');
  $q = $p->Montage();
  undef $image;
  $q->Write('x.miff');

Suppose you want to start out with a 100 by 100 pixel white canvas with a red pixel in the center. Try

  $image = Image::Magick->new;
  $image->Set(size=>'100x100');
  $image->ReadImage('canvas:white');
  $image->Set('pixel[49,49]'=>'red');

Here we reduce the intensity of the red component at (1,1) by half:

  @pixels = $image->GetPixel(x=>1,y=>1);
  $pixels[0]*=0.5;
  $image->SetPixel(x=>1,y=>1,color=>\@pixels);

Or suppose you want to convert your color image to grayscale:

  $image->Quantize(colorspace=>'gray');

Let's annotate an image with a Taipai TrueType font:

  $text = 'Works like magick!';
  $image->Annotate(font=>'kai.ttf', pointsize=>40, fill=>'green', text=>$text);

Perhaps you want to extract all the pixel intensities from an image and write them to STDOUT:

  @pixels = $image->GetPixels(map=>'I', height=>$height, width=>$width, normalize=>true);
  binmode STDOUT;
  print pack('B*',join('',@pixels));

Other clever things you can do with a PerlMagick objects include

  $i = $#$p"+1";   # return the number of images associated with object p
  push(@$q, @$p);  # push the images from object p onto object q
  @$p = ();        # delete the images but not the object p
  $p->Convolve([1, 2, 1, 2, 4, 2, 1, 2, 1]);   # 3x3 Gaussian kernel

Use the methods listed below to either read, write, or display an image or image sequence:

Read or Write Methods

Method	Parameters	Return Value	Description
Read	one or more filenames	the number of images read	read an image or image sequence
Write	filename	the number of images written	write an image or image sequence
Display	server name	the number of images displayed	display the image or image sequence to an X server
Animate	server name	the number of images animated	animate image sequence to an X server

For convenience, methods Write(), Display(), and Animate() can take any parameter that SetAttribute knows about. For example,

  $image->Write(filename=>'image.png', compression=>'None');

Use - as the filename to method Read() to read from standard in or to method Write() to write to standard out:

  binmode STDOUT;
  $image->Write('png:-');

To read an image in the GIF format from a PERL filehandle, use:

  $image = Image::Magick->new;
  open(IMAGE, 'image.gif');
  $image->Read(file=>\*IMAGE);
  close(IMAGE);

To write an image in the PNG format to a PERL filehandle, use:

  $filename = "image.png";
  open(IMAGE, ">$filename");
  $image->Write(file=>\*IMAGE, filename=>$filename);
  close(IMAGE);

Note, reading from or writing to a Perl filehandle may fail under Windows due to different versions of the C-runtime libraries between ImageMagick and the ActiveState Perl distributions or if one of the DLL's is linked with the /MT option. See Potential Errors Passing CRT Objects Across DLL Boundaries for an explanation.

If %0Nd, %0No, or %0Nx appears in the filename, it is interpreted as a printf format specification and the specification is replaced with the specified decimal, octal, or hexadecimal encoding of the scene number. For example,

  image%03d.miff

converts files image000.miff, image001.miff, etc.

You can optionally add Image to any method name. For example, ReadImage() is an alias for method Read().

Once you create an image with, for example, method ReadImage() you may want to operate on it. Below is a list of all the image manipulations methods available to you with PerlMagick. There are examples of select PerlMagick methods. Here is an example call to an image manipulation method:

  $image->Crop(geometry=>'100x100+10+20');
  $image->[$x]->Frame("100x200");

And here is a list of other image manipulation methods you can call:

Image Manipulation Methods

Method	Parameters	Description
AdaptiveBlur	geometry=>geometry, radius=>double, sigma=>double, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}	adaptively blur the image with a Gaussian operator of the given radius and standard deviation (sigma). Decrease the effect near edges.
AdaptiveResize	geometry=>geometry, width=>integer, height=>integer, filter=>{Point, Box, Triangle, Hermite, Hanning, Hamming, Blackman, Gaussian, Quadratic, Cubic, Catrom, Mitchell, Lanczos, Bessel, Sinc}, support=>double, blur=>double	adaptively resize image using data dependant triangulation. Specify blur > 1 for blurry or < 1 for sharp
AdaptiveSharpen	geometry=>geometry, radius=>double, sigma=>double, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}	adaptively sharpen the image with a Gaussian operator of the given radius and standard deviation (sigma). Increase the effect near edges.
AdaptiveThreshold	geometry=>geometry, width=>integer, height=>integer, offset=>integer	local adaptive thresholding.
AddNoise	noise=>{Uniform, Gaussian, Multiplicative, Impulse, Laplacian, Poisson}, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}	add noise to an image
AffineTransform	affine=>array of float values, translate=>float, float, scale=> float, float, rotate=>float, skewX=>float, skewY=>float, interpolate={Average, Bicubic, Bilinear, Filter, Integer, Mesh, NearestNeighbor}, background=>color name	affine transform image
Affinity	image=>image-handle, method=>{None, FloydSteinberg, Riemersma}	choose a particular set of colors from this image
Annotate	text=>string, font=>string, family=>string, style=>{Normal, Italic, Oblique, Any}, stretch=>{Normal, UltraCondensed, ExtraCondensed, Condensed, SemiCondensed, SemiExpanded, Expanded, ExtraExpanded, UltraExpanded}, weight=>integer, pointsize=>integer, density=>geometry, stroke=>color name, strokewidth=>integer, fill=>color name, undercolor=>color name, kerning=>float, geometry=>geometry, gravity=>{NorthWest, North, NorthEast, West, Center, East, SouthWest, South, SouthEast}, antialias=>{true, false}, x=>integer, y=>integer, affine=>array of float values, translate=>float, float, scale=>float, float, rotate=>float. skewX=>float, skewY=> float, align=>{Left, Center, Right}, encoding=>{UTF-8}, interline-spacing=>double, interword-spacing=>double, direction=>{right-to-left, left-to-right}	annotate an image with text. See QueryFontMetrics to get font metrics without rendering any text.
AutoGamma	channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}	automagically adjust gamma level of image
AutoLevel	channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}	automagically adjust color levels of image
AutoOrient		automagically orient the image
BlackThreshold	threshold=>string, , channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}	force all pixels below the threshold intensity into black
BlueShift	factor=>double,	simulate a scene at nighttime in the moonlight. Start with a factor of 1.5.
Blur	geometry=>geometry, radius=>double, sigma=>double, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}	reduce image noise and reduce detail levels with a Gaussian operator of the given radius and standard deviation (sigma).
Border	geometry=>geometry, width=>integer, height=>integer, bordercolor=>color name, compose=>{Undefined, Add, Atop, Blend, Bumpmap, Clear, ColorBurn, ColorDodge, Colorize, CopyBlack, CopyBlue, CopyCMYK, Cyan, CopyGreen, Copy, CopyMagenta, CopyOpacity, CopyRed, RGB, CopyYellow, Darken, Dst, Difference, Displace, Dissolve, DstAtop, DstIn, DstOut, DstOver, Dst, Exclusion, HardLight, Hue, In, Lighten, Luminize, Minus, Modulate, Multiply, None, Out, Overlay, Over, Plus, ReplaceCompositeOp, Saturate, Screen, SoftLight, Src, SrcAtop, SrcIn, SrcOut, SrcOver, Src, Subtract, Threshold, Xor },	surround the image with a border of color
Charcoal	geometry=>geometry, radius=>double, sigma=>double	simulate a charcoal drawing
Chop	geometry=>geometry, width=>integer, height=>integer, x=>integer, y=>integer	chop an image
Clamp		restrict color values from 0 to the quantum depth.
Clip	id=>name, inside=>{true, false},	apply along a named path from the 8BIM profile.
ClipMask	mask=>image-handle	clip image as defined by the image mask
Clut	image=>image-handle, channel=>{Red, RGB, CMYK, Cyan, Green, Magenta, Blue, Yellow, Opacity, Black, or All}	apply a color lookup table to an image sequence
Coalesce		merge a sequence of images
Color	color=>color name	set the entire image to this color.
ColorDecisionList	filename=>string,	color correct with a color decision list.
Colorize	fill=>color name, opacity=>string	colorize the image with the fill color
ColorMatrix	matrix=>array of float values	apply color correction to the image. Although you can use variable sized matrices, typically you use a 5 x 5 for an RGBA image and a 6x6 for CMYKA. A 6x6 matrix is required for offsets (populate the last column with normalized values).
Comment	string	add a comment to your image
CompareLayers	method=>{any, clear, overlay}	compares each image with the next in a sequence and returns the minimum bounding region of any pixel differences it discovers. Images do not have to be the same size, though it is best that all the images are coalesced (images are all the same size, on a flattened canvas, so as to represent exactly how a specific frame should look).
Composite	image=>image-handle, compose=>{Undefined, Add, Atop, Blend, Bumpmap, Clear, ColorBurn, ColorDodge, Colorize, CopyBlack, CopyBlue, CopyCMYK, Cyan, CopyGreen, Copy, CopyMagenta, CopyOpacity, CopyRed, RGB, CopyYellow, Darken, Dst, Difference, Displace, Dissolve, DstAtop, DstIn, DstOut, DstOver, Dst, Exclusion, HardLight, Hue, In, Lighten, Luminize, Minus, Modulate, Multiply, None, Out, Overlay, Over, Plus, ReplaceCompositeOp, Saturate, Screen, SoftLight, Src, SrcAtop, SrcIn, SrcOut, SrcOver, Src, Subtract, Threshold, Xor }, mask=>image-handle, geometry=>geometry, x=>integer, y=>integer, gravity=>{NorthWest, North, NorthEast, West, Center, East, SouthWest, South, SouthEast}, opacity=>integer, tile=>{True, False}, rotate=>double, color=>color name, blend=>geometry, interpolate=>{undefined, average, bicubic, bilinear, filter, integer, mesh, nearest-neighbor, spline}	composite one image onto another. Use the rotate parameter in concert with the tile parameter.
Contrast	sharpen=>{True, False}	enhance or reduce the image contrast
ContrastStretch	levels=>string, 'black-point'=>double, 'white-point'=>double, channel=>{Red, RGB, CMYK, Cyan, Green, Magenta, Blue, Yellow, Opacity, Black, or All}	improve the contrast in an image by `stretching' the range of intensity values
Convolve	coefficients=>array of float values, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}, bias=>double	apply a convolution kernel to the image. Given a kernel order , you would supply order*order float values (e.g. 3x3 implies 9 values).
Crop	geometry=>geometry, width=>integer, height=>integer, x=>integer, y=>integer, fuzz=>double, gravity=>{NorthWest, North, NorthEast, West, Center, East, SouthWest, South, SouthEast}	crop an image
CycleColormap	amount=>integer	displace image colormap by amount
Decipher	passphrase=>string	convert cipher pixels to plain pixels
Deconstruct		break down an image sequence into constituent parts
Deskew	geometry=>string,threshold=>double	straighten the image
Despeckle		reduce the speckles within an image
Difference	image=>image-handle	compute the difference metrics between two images
Distort	points=>array of float values, method=>{Affine, AffineProjection, Bilinear, Perspective, Resize, ScaleRotateTranslate}, virtual-pixel=>{Background Black Constant Dither Edge Gray Mirror Random Tile Transparent White}, best-fit=>{True, False}	distort image
Draw	primitive=>{point, line, rectangle, arc, ellipse, circle, path, polyline, polygon, bezier, color, matte, text, @filename}, points=>string , method=>{Point, Replace, Floodfill, FillToBorder, Reset}, stroke=>color name, fill=>color name, font=>string, pointsize=>integer, strokewidth=>float, antialias=>{true, false}, bordercolor=>color name, x=>float, y=>float, dash-offset=>float, dash-pattern=>array of float values, affine=>array of float values, translate=>float, float, scale=>float, float, rotate=>float, skewX=>float, skewY=>float, interpolate=>{undefined, average, bicubic, bilinear, mesh, nearest-neighbor, spline}, kerning=>float, text=>string, vector-graphics=>string, interline-spacing=>double, interword-spacing=>double, direction=>{right-to-left, left-to-right}	annotate an image with one or more graphic primitives.
Encipher	passphrase=>string	convert plain pixels to cipher pixels
Edge	radius=>double	enhance edges within the image with a convolution filter of the given radius.
Emboss	geometry=>geometry, radius=>double, sigma=>double	emboss the image with a convolution filter of the given radius and standard deviation (sigma).
Enhance		apply a digital filter to enhance a noisy image
Equalize	channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}	perform histogram equalization to the image
Extent	geometry=>geometry, width=>integer, height=>integer, x=>integer, y=>integer, fuzz=>double, background=>color name, gravity=>{NorthWest, North, NorthEast, West, Center, East, SouthWest, South, SouthEast}	set the image size
Evaluate	value=>double, operator=>{Add, And, Divide, LeftShift, Max, Min, Multiply, Or, Rightshift, Subtract, Xor}, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}	apply an arithmetic, relational, or logical expression to the image
Filter	kernel=>string, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}, bias=>double	apply a convolution kernel to the image.
Flip		reflect the image scanlines in the vertical direction
Flop		reflect the image scanlines in the horizontal direction
FloodfillPaint	geometry=>geometry, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}, x=>integer, y=>integer , fill=>color name, bordercolor=>color name, fuzz=>double, invert=>{True, False}	changes the color value of any pixel that matches the color of the target pixel and is a neighbor. If you specify a border color, the color value is changed for any neighbor pixel that is not that color.
ForwardFourierTransform	magnitude=>{True, False}	implements the forward discrete Fourier transform (DFT)
Frame	geometry=>geometry, width=>integer, height=>integer, inner=>integer, outer=>integer, fill=>color name, compose=>{Undefined, Add, Atop, Blend, Bumpmap, Clear, ColorBurn, ColorDodge, Colorize, CopyBlack, CopyBlue, CopyCMYK, Cyan, CopyGreen, Copy, CopyMagenta, CopyOpacity, CopyRed, RGB, CopyYellow, Darken, Dst, Difference, Displace, Dissolve, DstAtop, DstIn, DstOut, DstOver, Dst, Exclusion, HardLight, Hue, In, Lighten, Luminize, Minus, Modulate, Multiply, None, Out, Overlay, Over, Plus, ReplaceCompositeOp, Saturate, Screen, SoftLight, Src, SrcAtop, SrcIn, SrcOut, SrcOver, Src, Subtract, Threshold, Xor },	surround the image with an ornamental border
Function	parameters=>array of float values, function=>{Sin}, virtual-pixel=>{Background Black Constant Dither Edge Gray Mirror Random Tile Transparent White}	apply a function to the image
Gamma	gamma=>string, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}	gamma correct the image
GaussianBlur	geometry=>geometry, radius=>double, sigma=>double, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}	reduce image noise and reduce detail levels with a Gaussian operator of the given radius and standard deviation (sigma).
GetPixel	geometry=>geometry, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}, normalize=>{true, false}, x=>integer, y=>integer	get a single pixel. By default normalized pixel values are returned.
GetPixels	geometry=>geometry, width=>integer, height=>integer, x=>integer, y=>integer, map=>string, normalize=>{true, false}	get image pixels as defined by the map (e.g. "RGB", "RGBA", etc.). By default non-normalized pixel values are returned.
HaldClut	image=>image-handle, channel=>{Red, RGB, CMYK, Cyan, Green, Magenta, Blue, Yellow, Opacity, Black, or All}	apply a Hald color lookup table to an image sequence
Identify	file=>file, features=>distance, unique=>{True, False}	identify the attributes of an image
Implode	amount=>double, interpolate=>{undefined, average, bicubic, bilinear, mesh, nearest-neighbor, spline}	implode image pixels about the center
InverseDiscreteFourierTransform	magnitude=>{True, False}	implements the inverse discrete Fourier transform (DFT)
Label	string	assign a label to an image
Layers	method=>{coalesce, compare-any, compare-clear, compare-over, composite, dispose, flatten, merge, mosaic, optimize, optimize-image, optimize-plus, optimize-trans, remove-dups, remove-zero}, compose=>{Undefined, Add, Atop, Blend, Bumpmap, Clear, ColorBurn, ColorDodge, Colorize, CopyBlack, CopyBlue, CopyCMYK, Cyan, CopyGreen, Copy, CopyMagenta, CopyOpacity, CopyRed, RGB, CopyYellow, Darken, Dst, Difference, Displace, Dissolve, DstAtop, DstIn, DstOut, DstOver, Dst, Exclusion, HardLight, Hue, In, Lighten, LinearLight, Luminize, Minus, Modulate, Multiply, None, Out, Overlay, Over, Plus, ReplaceCompositeOp, Saturate, Screen, SoftLight, Src, SrcAtop, SrcIn, SrcOut, SrcOver, Src, Subtract, Threshold, Xor }, dither=>{true, false}	compare each image the GIF disposed forms of the previous image in the sequence. From this, attempt to select the smallest cropped image to replace each frame, while preserving the results of the animation.
Level	levels=>string, 'black-point'=>double, 'gamma'=>double, 'white-point'=>double, channel=>{Red, RGB, CMYK, Cyan, Green, Magenta, Blue, Yellow, Opacity, Black, or All}	adjust the level of image contrast
LevelColors	invert=>>{True, False}, 'black-point'=>string, 'white-point'=>string, channel=>{Red, RGB, CMYK, Cyan, Green, Magenta, Blue, Yellow, Opacity, Black, or All}	level image with the given colors
LinearStretch	levels=>string, 'black-point'=>double, 'white-point'=>double	linear with saturation stretch
LiquidResize	geometry=>geometry, width=>integer, height=>integer, delta-x=>double, rigidity=>double	rescale image with seam-carving.
Magnify		double the size of an image
Mask	mask=>image-handle	composite image pixels as defined by the mask
MatteFloodfill	geometry=>geometry, x=>integer, y=>integer , matte=>integer, bordercolor=>color name, fuzz=>double, invert=>{True, False}	changes the matte value of any pixel that matches the color of the target pixel and is a neighbor. If you specify a border color, the matte value is changed for any neighbor pixel that is not that color.
MedianFilter	geometry=>geometry, width=>integer, height=>integer, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}	replace each pixel with the median intensity pixel of a neighborhood.
Minify		half the size of an image
Mode	geometry=>geometry, width=>integer, height=>integer, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}	make each pixel the predominant color of the neighborhood.
Modulate	factor=>geometry, brightness=>double, saturation=>double, hue=>double, lightness=>double, whiteness=>double, blackness=>double	vary the brightness, saturation, and hue of an image by the specified percentage
Morphology	kernel=>string, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}, iterations=>integer	apply a morphology method to the image.
MotionBlur	geometry=>geometry, radius=>double, sigma=>double, angle=>double, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}	reduce image noise and reduce detail levels with a Gaussian operator of the given radius and standard deviation (sigma) at the given angle to simulate the effect of motion
Negate	gray=>{True, False}, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}	replace each pixel with its complementary color (white becomes black, yellow becomes blue, etc.)
Normalize	channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}	transform image to span the full range of color values
OilPaint	radius=>integer	simulate an oil painting
Opaque	color=>color name, fill=>color name, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}, invert=>{True, False}	change this color to the fill color within the image
OrderedDither	threshold=>{threshold, checks, o2x2, o3x3, o4x4, o8x8, h4x4a, h6x6a, h8x8a, h4x4o, h6x6o, h8x8o, h16x16o, hlines6x4}, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}	order dither image
Polaroid	caption=>string, angle=>double, pointsize=>double, font=>string, stroke=> color name, strokewidth=>integer, fill=>color name, gravity=>{NorthWest, North, NorthEast, West, Center, East, SouthWest, South, SouthEast}, background=>color name	simulate a Polaroid picture.
Posterize	levels=>integer, dither=>{True, False}	reduce the image to a limited number of color level
Profile	name=>string, profile=>blob, rendering-intent=>{Undefined, Saturation, Perceptual, Absolute, Relative}, black-point-compensation=>{True, False}	add or remove ICC or IPTC image profile; name is formal name (e.g. ICC or filename; set profile to '' to remove profile
Quantize	colors=>integer, colorspace=>{RGB, Gray, Transparent, OHTA, XYZ, YCbCr, YIQ, YPbPr, YUV, CMYK, sRGB, HSL, HSB}, treedepth=> integer, dither=>{True, False}, dither-method=>{Riemersma, Floyd-Steinberg}, measure_error=>{True, False}, global_colormap=>{True, False}, transparent-color=>color	preferred number of colors in the image
RadialBlur	angle=>double	radial blur the image.
Raise	geometry=>geometry, width=>integer, height=>integer, x=>integer, y=>integer, raise=>{True, False}	lighten or darken image edges to create a 3-D effect
ReduceNoise	geometry=>geometry, width=>integer, height=>integer, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}	reduce noise in the image with a noise peak elimination filter
Remap	image=>image-handle, dither=>{true, false}, dither-method=>{Riemersma, Floyd-Steinberg}	replace the colors of an image with the closest color from a reference image.
Resample	density=>geometry, x=>double, y=>double, filter=>{Point, Box, Triangle, Hermite, Hanning, Hamming, Blackman, Gaussian, Quadratic, Cubic, Catrom, Mitchell, Lanczos, Bessel, Sinc}, support=>double	resample image to desired resolution. Specify blur > 1 for blurry or < 1 for sharp
Resize	geometry=>geometry, width=>integer, height=>integer, filter=>{Point, Box, Triangle, Hermite, Hanning, Hamming, Blackman, Gaussian, Quadratic, Cubic, Catrom, Mitchell, Lanczos, Bessel, Sinc}, support=>double, blur=>double	scale image to desired size. Specify blur > 1 for blurry or < 1 for sharp
Roll	geometry=>geometry, x=>integer, y=>integer	roll an image vertically or horizontally
Rotate	degrees=>double, background=>color name	rotate an image
Sample	geometry=>geometry, width=>integer, height=>integer	scale image with pixel sampling.
Scale	geometry=>geometry, width=>integer, height=>integer	scale image to desired size
Segment	colorspace=>{RGB, Gray, Transparent, OHTA, XYZ, YCbCr, YCC, YIQ, YPbPr, YUV, CMYK}, verbose={True, False}, cluster-threshold=>double, smoothing-threshold=double	segment an image by analyzing the histograms of the color components and identifying units that are homogeneous
SelectiveBlur	geometry=>geometry, radius=>double, sigma=>double, threshold=>double, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}	selectively blur pixels within a contrast threshold.
Separate	channel=>{Red, RGB, CMYK, Cyan, Green, Magenta, Blue, Yellow, Opacity, Black, or All}	separate a channel from the image into a grayscale image
Shade	geometry=>geometry, azimuth=>double, elevation=>double, gray=>{true, false}	shade the image using a distant light source
SetPixel	geometry=>geometry, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}, color=>array of float values, x=>integer, y=>integer, color=>array of float values	set a single pixel. By default normalized pixel values are expected.
Shadow	geometry=>geometry, opacity=>double, sigma=>double, x=>integer, y=>integer	simulate an image shadow
Sharpen	geometry=>geometry, radius=>double, sigma=>double, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}	sharpen the image with a Gaussian operator of the given radius and standard deviation (sigma).
Shave	geometry=>geometry, width=>integer, height=>integer	shave pixels from the image edges
Shear	geometry=>geometry, x=>double, y=>double fill=>color name	shear the image along the X or Y axis by a positive or negative shear angle
SigmoidalContrast	geometry=>string, 'contrast'=>double, 'mid-point'=>double channel=>{Red, RGB, CMYK, Cyan, Green, Magenta, Blue, Yellow, Opacity, Black, or All}, sharpen=>{True, False}	sigmoidal non-lineraity contrast control. Increase the contrast of the image using a sigmoidal transfer function without saturating highlights or shadows. Contrast indicates how much to increase the contrast (0 is none; 3 is typical; 20 is a lot); mid-point indicates where midtones fall in the resultant image (0 is white; 50% is middle-gray; 100% is black). To decrease contrast, set sharpen to False.
Signature		generate an SHA-256 message digest for the image pixel stream
Sketch	geometry=>geometry, radius=>double, sigma=>double, angle=>double	sketch the image with a Gaussian operator of the given radius and standard deviation (sigma) at the given angle
Solarize	geometry=>string,threshold=>double	negate all pixels above the threshold level
SparseColor	points=>array of float values, method=>{Barycentric, Bilinear, Shepards, Voronoi}, virtual-pixel=>{Background Black Constant Dither Edge Gray Mirror Random Tile Transparent White}	interpolate the image colors around the supplied points
Splice	geometry=>geometry, width=>integer, height=>integer, x=>integer, y=>integer, fuzz=>double, background=>color name, gravity=>{NorthWest, North, NorthEast, West, Center, East, SouthWest, South, SouthEast}	splice an image
Spread	radius=>double	displace image pixels by a random amount
Statistic	geometry=>geometry, width=>integer, height=>integer, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}, type=>{Median, Mode, Mean, Maximum, Minimum, ReduceNoise}	replace each pixel with corresponding statistic from the neighborhood.
Stegano	image=>image-handle, offset=>integer	hide a digital watermark within the image
Stereo	image=>image-handle, x=>integer, y=>integer	composites two images and produces a single image that is the composite of a left and right image of a stereo pair
Strip		strip an image of all profiles and comments.
Swirl	degrees=>double, interpolate=>{undefined, average, bicubic, bilinear, mesh, nearest-neighbor, spline}	swirl image pixels about the center
Texture	texture=>image-handle	name of texture to tile onto the image background
Thumbnail	geometry=>geometry, width=>integer, height=>integer	changes the size of an image to the given dimensions and removes any associated profiles.
Threshold	threshold=>string, channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}	threshold the image
Tint	fill=>color name, opacity=>string	tint the image with the fill color.
Transparent	color=>color name, invert=>{True, False}	make this color transparent within the image
Transpose		flip image in the vertical direction and rotate 90 degrees
Transverse		flop image in the horizontal direction and rotate 270 degrees
Trim		remove edges that are the background color from the image
UnsharpMask	geometry=>geometry, radius=>double, sigma=>double, amount=>double, threshold=>double	sharpen the image with the unsharp mask algorithm.
Vignette	geometry=>geometry, radius=>double, sigma=>double, x=>integer, y=>integer, background=>color name	offset the edges of the image in vignette style
Wave	geometry=>geometry, amplitude=>double, wavelength=>double, interpolate=>{undefined, average, bicubic, bilinear, mesh, nearest-neighbor, spline}	alter an image along a sine wave
WhiteThreshold	threshold=>string, , channel=>{All, Default, Alpha, Black, Blue, CMYK, Cyan, Gray, Green, Index, Magenta, Opacity, Red, RGB, Yellow}	force all pixels above the threshold intensity into white

Note, that the geometry parameter is a short cut for the width and height parameters (e.g. geometry=>'106x80' is equivalent to width=>106, height=>80 ).

You can specify @filename in both Annotate() and Draw(). This reads the text or graphic primitive instructions from a file on disk. For example,

   $image->Draw(fill=>'red', primitive=>'rectangle',
     points=>'20,20 100,100  40,40 200,200  60,60 300,300');

Is equivalent to

   $image->Draw(fill=>'red', primitive=>'@draw.txt');

Where draw.txt is a file on disk that contains this:

  rectangle 20, 20 100, 100
  rectangle 40, 40 200, 200
  rectangle 60, 60 300, 300

The text parameter for methods, Annotate(), Comment(), Draw(), and Label() can include the image filename, type, width, height, or other image attribute by embedding these special format characters:

   %b   file size
   %c   comment
   %d   directory
   %e   filename extension
   %f   filename
   %g   page geometry
   %h   height
   %i   input filename
   %k   number of unique colors
   %l   label
   %m   magick
   %n   number of scenes
   %o   output filename
   %p   page number
   %q   quantum depth
   %r   image class and colorspace
   %s   scene number
   %t   top of filename
   %u   unique temporary filename
   %w   width
   %x   x resolution
   %y   y resolution
   %z   image depth
   %C   image compression type
   %D   image dispose method
   %H   page height
   %Q   image compression quality
   %T   image delay
   %W   page width
   %X   page x offset
   %Y   page y offset
   %@   bounding box
   %#   signature
   %%   a percent sign
   \n   newline
   \r   carriage return

For example,

  text=>"%m:%f %wx%h"

produces an annotation of MIFF:bird.miff 512x480 for an image titled bird.miff and whose width is 512 and height is 480.

You can optionally add Image to any method name. For example, TrimImage() is an alias for method Trim().

Most of the attributes listed above have an analog in convert. See the documentation for a more detailed description of these attributes.

Use method Set() to set an image attribute. For example,

  $image->Set(dither=>'True');
  $image->[$x]->Set(delay=>3);

Where this example uses 'True' and this document says '{True, False}', you can use the case-insensitive strings 'True' and 'False', or you can use the integers 1 and 0.

When you call Get() on a Boolean attribute, Image::Magick returns 1 or 0, not a string.

And here is a list of all the image attributes you can set:

Image Attributes

Attribute	Values	Description
adjoin	{True, False}	join images into a single multi-image file
alpha	{On, Off, Opaque, Transparent, Copy, Extract, Set}	control of and special operations involving the alpha/matte channel
antialias	{True, False}	remove pixel aliasing
area-limit	integer	set pixel area resource limit.
attenuate	double	lessen (or intensify) when adding noise to an image.
authenticate	string	decrypt image with this password.
background	color name	image background color
blue-primary	x-value, y-value	chromaticity blue primary point (e.g. 0.15, 0.06)
bordercolor	color name	set the image border color
clip-mask	image	associate a clip mask with the image.
colormap[i]	color name	color name (e.g. red) or hex value (e.g. #ccc) at position i
comment	string	set the image comment
compression	{None, BZip, Fax, Group4, JPEG, JPEG2000, LosslessJPEG, LZW, RLE, Zip}	type of image compression
debug	{All, Annotate, Blob, Cache, Coder, Configure, Deprecate, Draw, Exception, Locale, None, Resource, Transform, X11}	display copious debugging information
delay	integer	this many 1/100ths of a second must expire before displaying the next image in a sequence
density	geometry	vertical and horizontal resolution in pixels of the image
depth	integer	image depth
direction	{Undefined, right-to-left, left-to-right	render text right-to-left or left-to-right
disk-limit	integer	set disk resource limit
dispose	{Undefined, None, Background, Previous}	layer disposal method
dither	{True, False}	apply error diffusion to the image
display	string	specifies the X server to contact
extract	geometry	extract area from image
file	filehandle	set the image filehandle
filename	string	set the image filename
fill	color	The fill color paints any areas inside the outline of drawn shape.
font	string	use this font when annotating the image with text
fuzz	integer	colors within this distance are considered equal
gamma	double	gamma level of the image
Gravity	{Forget, NorthWest, North, NorthEast, West, Center, East, SouthWest, South, SouthEast}	type of image gravity
green-primary	x-value, y-value	chromaticity green primary point (e.g. 0.3, 0.6)
index[x, y]	string	colormap index at position (x, y)
interlace	{None, Line, Plane, Partition, JPEG, GIF, PNG}	the type of interlacing scheme
iterations	integer	add Netscape loop extension to your GIF animation
label	string	set the image label
loop	integer	add Netscape loop extension to your GIF animation
magick	string	set the image format
map-limit	integer	set map resource limit
mask	image	associate a mask with the image.
matte	{True, False}	enable the image matte channel
mattecolor	color name	set the image matte color
memory-limit	integer	set memory resource limit
monochrome	{True, False}	transform the image to black and white
option	string	associate an option with an image format (e.g. option=>'ps:imagemask'
orientation	{top-left, top-right, bottom-right, bottom-left, left-top, right-top, right-bottom, left-bottom}	image orientation
page	{ Letter, Tabloid, Ledger, Legal, Statement, Executive, A3, A4, A5, B4, B5, Folio, Quarto, 10x14} or geometry	preferred size and location of an image canvas
pixel[x, y]	string	hex value (e.g. #ccc) at position (x, y)
pointsize	integer	pointsize of the Postscript or TrueType font
quality	integer	JPEG/MIFF/PNG compression level
red-primary	x-value, y-value	chromaticity red primary point (e.g. 0.64, 0.33)
sampling-factor	geometry	horizontal and vertical sampling factor
scene	integer	image scene number
server	string	specifies the X server to contact
size	string	width and height of a raw image
stroke	color	The stroke color paints along the outline of a shape.
texture	string	name of texture to tile onto the image background
tile-offset	geometry	image tile offset
time-limit	integer	set time resource limit in seconds
type	{Bilevel, Grayscale, GrayscaleMatte, Palette, PaletteMatte, TrueColor, TrueColorMatte, ColorSeparation, ColorSeparationMatte}	image type
units	{ Undefined, PixelsPerInch, PixelsPerCentimeter}	units of image resolution
verbose	{True, False}	print detailed information about the image
virtual-pixel	{Background Black Constant Dither Edge Gray Mirror Random Tile Transparent White}	the virtual pixel method
white-point	x-value, y-value	chromaticity white point (e.g. 0.3127, 0.329)

Note, that the geometry parameter is a short cut for the width and height parameters (e.g. geometry=>'106x80' is equivalent to width=>106, height=>80).

SetAttribute() is an alias for method Set().

Most of the attributes listed above have an analog in convert. See the documentation for a more detailed description of these attributes.

Use method Get() to get an image attribute. For example,

  ($a, $b, $c) = $image->Get('colorspace', 'magick', 'adjoin');
  $width = $image->[3]->Get('columns');

In addition to all the attributes listed in Set an Image Attribute , you can get these additional attributes:

Image Attributes

Attribute	Values	Description
area	integer	current area resource consumed
base-columns	integer	base image width (before transformations)
base-filename	string	base image filename (before transformations)
base-rows	integer	base image height (before transformations)
class	{Direct, Pseudo}	image class
colors	integer	number of unique colors in the image
columns	integer	image width
copyright	string	get PerlMagick's copyright
directory	string	tile names from within an image montage
elapsed-time	double	elapsed time in seconds since the image was created
error	double	the mean error per pixel computed with methods Compare() or Quantize()
bounding-box	string	image bounding box
disk	integer	current disk resource consumed
filesize	integer	number of bytes of the image on disk
format	string	get the descriptive image format
geometry	string	image geometry
height	integer	the number of rows or height of an image
id	integer	ImageMagick registry id
mean-error	double	the normalized mean error per pixel computed with methods Compare() or Quantize()
map	integer	current memory-mapped resource consumed
matte	{True, False}	whether or not the image has a matte channel
maximum-error	double	the normalized max error per pixel computed with methods Compare() or Quantize()
memory	integer	current memory resource consumed
mime	string	MIME of the image format
montage	geometry	tile size and offset within an image montage
page.x	integer	x offset of image virtual canvas
page.y	integer	y offset of image virtual canvas
rows	integer	the number of rows or height of an image
signature	string	SHA-256 message digest associated with the image pixel stream
taint	{True, False}	True if the image has been modified
total-ink-density	double	returns the total ink density for a CMYK image
transparent-color	color name	set the image transparent color
user-time	double	user time in seconds since the image was created
version	string	get PerlMagick's version
width	integer	the number of columns or width of an image
x-resolution	integer	x resolution of the image
y-resolution	integer	y resolution of the image

GetAttribute() is an alias for method Get().

Most of the attributes listed above have an analog in convert. See the documentation for a more detailed description of these attributes.

  use Image::Magick;

  $logo=Image::Magick->New();
  $logo->Read('logo:');
  $sharp=Image::Magick->New();
  $sharp->Read('logo:');
  $sharp->Sharpen('0x1');
  $difference=$logo->Compare(image=>$sharp, metric=>'rmse');
  print $difference->Get('error'), "\n";
  $difference->Display();

Use method Montage() to create a composite image by combining several separate images. The images are tiled on the composite image with the name of the image optionally appearing just below the individual tile. For example,

  $image->Montage(geometry=>'160x160', tile=>'2x2', texture=>'granite:');

And here is a list of Montage() parameters you can set:

Montage Parameters

Parameter	Values	Description
background	color name	background color name
border	integer	image border width
filename	string	name of montage image
fill	color name	fill color for annotations
font	string	X11 font name
frame	geometry	surround the image with an ornamental border
geometry	geometry	preferred tile and border size of each tile of the composite image (e.g. 120x120+4+3>)
gravity	NorthWest, North, NorthEast, West, Center, East, SouthWest, South, SouthEast	direction image gravitates to within a tile
label	string	assign a label to an image
mode	Frame, Unframe, Concatenate	thumbnail framing options
pointsize	integer	pointsize of the Postscript or TrueType font
shadow	{True, False}	add a shadow beneath a tile to simulate depth
stroke	color name	stroke color for annotations
texture	string	name of texture to tile onto the image background
tile	geometry	the number of tiles per row and page (e.g. 6x4)
title	string	assign a title to the image montage
transparent	string	make this color transparent within the image

Note, that the geometry parameter is a short cut for the width and height parameters (e.g. geometry=>'106x80' is equivalent to width=>106, height=>80).

MontageImage() is an alias for method Montage().

Most of the attributes listed above have an analog in montage. See the documentation for a more detailed description of these attributes.

A blob contains data that directly represent a particular image format in memory instead of on disk. PerlMagick supports blobs in any of these image formats and provides methods to convert a blob to or from a particular image format.

Blob Methods

Method	Parameters	Return Value	Description
ImageToBlob	any image attribute	an array of image data in the respective image format	convert an image or image sequence to an array of blobs
BlobToImage	one or more blobs	the number of blobs converted to an image	convert one or more blobs to an image

ImageToBlob() returns the image data in their respective formats. You can then print it, save it to an ODBC database, write it to a file, or pipe it to a display program:

  @blobs = $image->ImageToBlob();
  open(DISPLAY,"| display -") || die;
  binmode DISPLAY;
  print DISPLAY $blobs[0];
  close DISPLAY;

Method BlobToImage() returns an image or image sequence converted from the supplied blob:

  @blob=$db->GetImage();
  $image=Image::Magick->new(magick=>'jpg');
  $image->BlobToImage(@blob);

Use these methods to obtain direct access to the image pixels:

Direct-access to Image Pixels

Method	Parameters	Description
GetAuthenticPixels	geometry=>geometry, width=>integer, height=>integer, x=>integer, y=>integer	return image pixels as a C pointer
GetVirtualPixels	geometry=>geometry, width=>integer, height=>integer, x=>integer, y=>integer	return image pixels as a const C pointer
GetAuthenticIndexQueue		return image indexes as a C pointer
GetVirtualIndexQueue		return image indexes as a const C pointer
SyncAuthenticPixels		sync image pixels to pixel cache

The Append() method append a set of images. For example,

  $p = $image->Append(stack=>{true,false});

appends all the images associated with object $image. By default, images are stacked left-to-right. Set stack to True to stack them top-to-bottom.

The Clone() method copies a set of images. For example,

  $q = $p->Clone();

copies all the images from object $p to $q. You can use this method for single or multi-image sequences.

The EvaluateImages() method applies an arithemtic, logical or relational expression to a set of images. For example,

  $p = $image->EvaluateImages('mean');

averages all the images associated with object $image.

The Features() method returns features for each channel in the image in each of four directions (horizontal, vertical, left and right diagonals) for the specified distance. The features include the angular second momentum, contrast, correlation, sum of squares: variance, inverse difference moment, sum average, sum varience, sum entropy, entropy, difference variance, difference entropy, information measures of correlation 1, information measures of correlation 2, and maximum correlation coefficient. Values in RGB, CMYK, RGBA, or CMYKA order (depending on the image type).

  @features = $image->Features(1);

Finally, the Transform() method accepts a fully-qualified geometry specification for cropping or resizing one or more images. For example,

The Flatten() method flattens a set of images and returns it. For example,

  $p = $images->Flatten(background=>'none');
  $p->Write('flatten.png');

The sequence of images is replaced by a single image created by composing each image after the first over the first image.

The Fx() method applies a mathematical expression to a set of images and returns the results. For example,

  $p = $image->Fx(expression=>'(g+b)/2.0',channel=>'red');
  $p->Write('fx.miff');

replaces the red channel with the average of the green and blue channels.

See FX, The Special Effects Image Operator for a detailed discussion of this method.

Histogram() returns the unique colors in the image and a count for each one. The returned values are an array of red, green, blue, opacity, and count values.

The Morph() method morphs a set of images. Both the image pixels and size are linearly interpolated to give the appearance of a meta-morphosis from one image to the next:

  $p = $image->Morph(frames=>integer);

where frames is the number of in-between images to generate. The default is 1.

Mosaic() creates an mosaic from an image sequence.

Method Mogrify() is a single entry point for the image manipulation methods (Manipulate an Image). The parameters are the name of a method followed by any parameters the method may require. For example, these calls are equivalent:

  $image->Crop('340x256+0+0');
  $image->Mogrify('crop', '340x256+0+0');

Method MogrifyRegion() applies a transform to a region of the image. It is similar to Mogrify() but begins with the region geometry. For example, suppose you want to brighten a 100x100 region of your image at location (40, 50):

  $image->MogrifyRegion('100x100+40+50', 'modulate', brightness=>50);

Ping() is a convenience method that returns information about an image without having to read the image into memory. It returns the width, height, file size in bytes, and the file format of the image. You can specify more than one filename but only one filehandle:

  ($width, $height, $size, $format) = $image->Ping('logo.png');
  ($width, $height, $size, $format) = $image->Ping(file=>\*IMAGE);
  ($width, $height, $size, $format) = $image->Ping(blob=>$blob);

This a more efficient and less memory intensive way to query if an image exists and what its characteristics are. PreviewImage() tiles 9 thumbnails of the specified image with an image processing operation applied at varying strengths. This may be helpful pin-pointing an appropriate parameter for a particular image processing operation. Choose from these operations: Rotate, Shear, Roll, Hue, Saturation, Brightness, Gamma, Spiff, Dull, Grayscale, Quantize, Despeckle, ReduceNoise, AddNoise, Sharpen, Blur, Threshold, EdgeDetect, Spread, Solarize, Shade, Raise, Segment, Swirl, Implode, Wave, OilPaint, CharcoalDrawing, JPEG. Here is an example:

  $preview = $image->Preview('Gamma');
  $preview->Display();

To have full control over text positioning you need font metric information. Use

  ($x_ppem, $y_ppem, $ascender, $descender, $width, $height, $max_advance)
         = $image->QueryFontMetrics(parameters);

Where parameters is any parameter of the Annotate method. The return values are:

• character width
• character height
• ascender
• descender
• text width
• text height
• maximum horizontal advance
• bounds: x1
• bounds: y1
• bounds: x2
• bounds: y2
• origin: x
• origin: y

Use QueryMultilineFontMetrics() to get the maximum text width and height for multiple lines of text.

Call QueryColor() with no parameters to return a list of known colors names or specify one or more color names to get these attributes: red, green, blue, and opacity value.

  @colors = $image->QueryColor();
  ($red, $green, $blue, $opacity) = $image->QueryColor('cyan');
  ($red, $green, $blue, $opacity) = $image->QueryColor('#716bae');

QueryColorname() accepts a color value and returns its respective name or hex value;

    $name = $image->QueryColorname('rgba(80,60,0,0)');

Call QueryFont() with no parameters to return a list of known fonts or specify one or more font names to get these attributes: font name, description, family, style, stretch, weight, encoding, foundry, format, metrics, and glyphs values.

  @fonts = $image->QueryFont();
  $weight = ($image->QueryFont('Helvetica'))[5];

Call QueryFormat() with no parameters to return a list of known image formats or specify one or more format names to get these attributes: adjoin, blob support, raw, decoder, encoder, description, and module.

  @formats = $image->QueryFormat();
  ($adjoin, $blob_support, $raw, $decoder, $encoder, $description, $module)
            = $image->QueryFormat('gif');

Call MagickToMime() with the image format name to get its MIME type such as images/tiff from tif.

  $mime = $image->MagickToMime('tif');

Use RemoteCommand() to send a command to an already running display or animate application. The only parameter is the name of the image file to display or animate.

  $image->RemoteCommand('image.jpg');

The Smush() method smushes a set of images together. For example,

  $p = $image->Smush(stack=>{true,false},offset=>integer);

smushes together all the images associated with object $image. By default, images are smushed left-to-right. Set stack to True to smushed them top-to-bottom.

Statistics() returns the image statistics for each channel in the image. The returned values are an array of depth, minima, maxima, mean, standard deviation, kurtosis, and skewness values in RGB, CMYK, RGBA, or CMYKA order (depending on the image type).

  @statistics = $image->Statistics();

Finally, the Transform() method accepts a fully-qualified geometry specification for cropping or resizing one or more images. For example,

  $p = $image->Transform(crop=>'100x100+0+0', gravity=>'Center');

You can optionally add Image to any method name above. For example, PingImage() is an alias for method Ping().

All PerlMagick methods return an undefined string context upon success. If any problems occur, the error is returned as a string with an embedded numeric status code. A status code less than 400 is a warning. This means that the operation did not complete but was recoverable to some degree. A numeric code greater or equal to 400 is an error and indicates the operation failed completely. Here is how exceptions are returned for the different methods:

Methods which return a number (e.g. Read(), Write()):

  $x = $image->Read(...);
  warn "$x" if "$x";      # print the error message
  $x =~ /(\d+)/;
  print $1;               # print the error number
  print 0+$x;             # print the number of images read

Methods which operate on an image (e.g. Resize(), Crop()):

  $x = $image->Crop(...);
  warn "$x" if "$x";      # print the error message
  $x =~ /(\d+)/;
  print $1;               # print the error number

Methods which return images (EvaluateSequence(), Montage(), Clone()) should be checked for errors this way:

  $x = $image->Montage(...);
  warn "$x" if !ref($x);  # print the error message
  $x =~ /(\d+)/;
  print $1;               # print the error number

Here is an example error message:

  Error 400: Memory allocation failed

Review the complete list of error and warning codes.

The following illustrates how you can use a numeric status code:

  $x = $image->Read('rose.png');
  $x =~ /(\d+)/;
  die "unable to continue" if ($1 == ResourceLimitError);

PerlMagick includes these constants:

  BlobError
  BlobWarning
  CacheError
  CacheWarning
  CoderError
  CoderWarning
  ConfigureError
  ConfigureWarning
  CorruptImageError
  CorruptImageWarning
  DelegateError
  DelegateWarning
  DrawError
  DrawWarning
  ErrorException
  FatalErrorException
  FileOpenError
  FileOpenWarning
  ImageError
  ImageWarning
  MissingDelegateError
  MissingDelegateWarning
  ModuleError
  ModuleWarning
  Opaque
  OptionError
  OptionWarning
  QuantumDepth
  QuantumRange
  RegistryError
  RegistryWarning
  ResourceLimitError
  ResourceLimitWarning
  StreamError
  StreamWarning
  Success
  Transparent
  TypeError
  TypeWarning
  WarningException
  XServerError
  XServerWarning

You can access them like this:

  Image::Magick->QuantumDepth